Epson Livingstation LS57P2 User Manual - Page 27
VCR and Satellite Receiver Connection
![]() |
View all Epson Livingstation LS57P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
VCR and Satellite Receiver Connection 1 Turn off and unplug your TV, VCR, and satellite receiver. 2 Connect the VCR as described in "VCR Connection" on page 24. 3 Connect the satellite antenna cable to the Satellite In connector on your satellite receiver. 4 Connect one end of an S-video cable to one of the S-video connectors on your satellite receiver. (If your satellite receiver uses a DVI connection, connect a DVI cable instead, as shown on page 21. If it uses a component video connection, connect it as shown on page 22.) 5 Connect the other end of the S-video cable to one of the S-video connectors on your VCR. 6 Connect one end of a standard, red/white audio cable to the R and L Audio Line Out connectors on your satellite receiver. 7 Connect the other end of the audio cable to the R and L Audio Line In connectors on your VCR. Note Before connecting a satellite receiver to the TV, be sure to read any instructions that came with the receiver. Note If your satellite receiver doesn't have an S-video connector, you can connect a video cable (yellow) to the Video connectors instead of the S-video cable using these instructions. It's best to connect your satellite receiver to the S-Video connectors on the back of the TV to free up the S-Video connector on the front to connect a camcorder. Setting Up the TV 27
![](/manual_guide/products/epson-livingstation-ls47p2-user-manual-0b95805/27.png)