Epson NX300 Quick Guide - Page 12
Copying a Photo - fax
UPC - 010343869080
View all Epson NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
■ To change the paper size, select Paper Size and choose the size of paper you loaded. ■ To change the paper type, select Paper Type and choose the type of paper you loaded. ■ To change the copy quality, select Quality and choose Standard Quality, Best, or Draft (for plain paper only). ■ To adjust the darkness or lightness of the copy, select Copy Density and choose a higher (darker) or lower (lighter) setting. Note: Not all Paper Type, Paper Size, Layout, and Quality settings may be available depending on the options you choose. 8. After you finish selecting your settings, press OK and then Menu to exit settings. 9. Press the x B&W or x Color button to begin copying. To cancel copying, press y Stop/Clear Settings. Note: Do not pull out paper as it is printing; it ejects automatically. Copying a Photo You can copy one or two photos onto 4 × 6-inch, 5 × 7-inch, or letter-size Epson photo paper (various types available) for instant photo reprints. 1. Press the P On button to turn on the NX300 Series. 2. Load Epson photo paper in the sheet feeder (see page 5). 3. Place one or two photos on the scanner glass. Place them at least 1/4 inch (5 mm) apart (see page 8). 4. Press the Copy/Fax button to enter Copy mode. 5. Press u or d or use the numeric keypad to select the number of copies you want (up to 99). 6. To change the layout, press Menu, press u or d to select Layout, and press OK. 12 Copying a Document or Photo