Epson P-2000 Product Information Guide - Page 3
Installing/Replacing the Battery, Removing the Battery - ac adapter
UPC - 010343852112
View all Epson P-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Epson P-2000 Installing/Replacing the Battery Follow these steps to install or replace the Lithium ion battery: 1. Turn the P-2000 upside down and slide the battery cover to the left to open it. 4. Push the catch down. The battery pops out. Catch 5. Pull out the battery. Then close the battery cover. 2. If you need to remove the battery, follow the instructions below, then return here to step 3. 3. Insert the battery into the compartment as shown. Make sure the gold contacts on the battery go in first. 4. Close the battery cover and slide it to the right until it clicks. Charging the Battery After installing the battery, you need to charge it using the AC adapter. It takes about 3 hours to fully charge the battery when the P-2000 is off. It takes longer when the P-2000 is on. The Charge light is green while the battery is being charged. When the battery is fully charged, the light turns off. To charge the battery, connect the AC adapter as shown below. Connect the other end to the power cord, and plug it into an electrical outlet. BATT. Removing the Battery If you need to replace the battery or plan to store the P-2000 for an extended period of time, follow these steps to remove the battery: 1. Make sure the P-2000 is turned off. 2. Remove the AC adapter if it is connected to the P-2000. Caution: Never remove the battery while the P-2000 is turned on. Doing so may cause files to be lost or damaged. 3. Open the battery cover. Caution: Do not connect the AC adapter when the battery is not installed; this can damage the P-2000. The battery status is displayed in the top right corner of the LCD screen when the P-2000 is on. : Battery is fully charged. : Battery power is about half full. : Battery power is low. : Battery power is running out. The P-2000 will shut down automatically. Charge the battery using the AC adapter. : Battery is charging. Note: The P-2000 stops charging if the battery becomes hot when charging while it is on. It will start charging again when it cools down. 11/04 Epson P-2000 - 3