Epson P-2000 Product Information Guide - Page 5

Epson P-2000 Using Memory Cards The P-2000 has two memory card slots, one for CompactFlash cards, and one for Secure Digital cards. It supports the following types of memory cards: ❏ CompactFlash Type I and Type II ❏ Microdrive™ (3.3 V) ❏ SD (Secure Digital) ❏ MultiMedia card (MMC V 2.1 or later), up to 512MB If you have a CompactFlash adapter, you can also use the following types of memory cards: ❏ Memory Stick® ❏ SmartMedia™ (3.3 V only) ❏ xD-Picture card™ Caution: Make sure you follow all instructions included with your memory card. Never remove a memory card while the Access light is flashing. Doing so may cause files to be lost or damaged. Do not put labels or stickers on memory cards. The sticker may peel off, preventing the card from being ejected and damaging the P-2000. Avoid using or storing cards in direct sunlight, or in places that are extremely hot, humid, or dusty. Using the CompactFlash Card Slot You can use Type I and Type II CompactFlash cards or Microdrive cards in the C/F Card slot. Insert the memory card into the slot with the back of the card facing the LCD. Then push the memory card all the way into the slot. Back side Caution: Make sure you insert memory cards in the correct orientation. Otherwise, the card and P-2000 may be damaged. If you are using a CompactFlash adapter, put the card into the adapter and insert the adapter into the slot. To remove a card from the C/F Card slot, first make sure the Access light is off. Then press the eject button and pull out the card. If the button is not sticking out, press it once to pop it out, then press it again to eject the card. Note: If you are using a CompactFlash adapter, remove the adapter from the P-2000; do not remove only the memory card. Using the Secure Digital Card Slot You can use Secure Digital or MultiMedia cards in the SD Card slot. Insert the memory card into the slot with the back of the card facing the LCD. Then push the memory card all the way into the slot. Back side Caution: Make sure you insert memory cards in the correct orientation. Otherwise, the card and P-2000 may be damaged. To remove a card from the SD Card slot, first make sure the Access light is off. Then press the top of the card to make it pop out. Then pull it out of the slot. 11/04 Epson P-2000 - 5