Epson P10000 User Manual
Epson P10000 Manual
 |
View all Epson P10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson P10000 manual content summary:
- Epson P10000 | User Manual - Page 1
Epson SureColor® P-Series P10000/P20000 Setup - Epson P10000 | User Manual - Page 2
Contents Unpacking and assembling the printer 2 Assembling the stand ...3 Mounting the printer on the stand 6 Attaching the support bar ...9 Attaching the paper basket ...12 Completing setup and connecting the power cord 16 Installing ink ...18 Installing the internal print server 21 Loading - Epson P10000 | User Manual - Page 3
2 | Unpacking and assembling the printer Unpacking and assembling the printer Unless otherwise indicated, the illustrations in this guide show the SureColor® P20000, but the instructions apply to all models. Follow these steps to assemble your printer and its stand. Before you begin, make sure you - Epson P10000 | User Manual - Page 4
need floor space of approximately: • 13 × 13 feet (4 × 4 m) for the SureColor P10000 and stand • 19 × 19 feet (5.8 × 5.8 m) for the SureColor P20000 and stand Note: Make sure you save the box and packaging in case you need to ship the printer. Assembling the stand 1. Make sure you have all of these - Epson P10000 | User Manual - Page 5
4 | Assembling the stand 2. Slide the horizontal strut into the sides of the stand. Align the L and R stickers on each side of the stand with the stickers on each side of the horizontal strut. 3. Use the hex wrench (a) to tighten the two fasteners on each side of the stand. - Epson P10000 | User Manual - Page 6
Assembling the stand | 5 4. Use the hex wrench (a) to attach a mounting bracket to each side of the stand with 4 bolts (A). Note: Make sure you match the left and right bracket with the correct side of the stand. The brackets are labeled L and R. 5. Lock the casters. - Epson P10000 | User Manual - Page 7
on the stand Mounting the printer on the stand 1. Make sure you have these items: Printer Hex wrench (a) Stand 3 bolts (A) and washers For the SureColor P20000, make sure you also have these items: Thumbscrew Alignment bracket 2. Remove the cardboard panels and other printer packing materials. - Epson P10000 | User Manual - Page 8
Mounting the printer on the stand | 7 3. For the SureColor P20000, attach the alignment bracket to the back of the printer with the thumbscrew. 4. Lift the printer using the handholds shown below. WARNING: Four or more people are required to lift the printer. - Epson P10000 | User Manual - Page 9
8 | Mounting the printer on the stand 5. Mount the printer on the stand, aligning the arrows on the back of the stand and on the back of the printer. 6. Secure the printer to the stand with the bolts (A) and washers using the hex wrench (a). - Epson P10000 | User Manual - Page 10
Attaching the support bar | 9 Attaching the support bar Keep the support bar in the stored position unless you are using the paper basket or the optional auto take-up reel. 1. Make sure you have all the included support bar parts. Left support arm Support bar 2 bolts (A) 8 bolts (B) Hex wrench - Epson P10000 | User Manual - Page 11
10 | Attaching the support bar 2. Attach the left and right support arms to the base of the printer stand. 3. Use the hex wrench (b) to fasten each support arm with 4 bolts (B). - Epson P10000 | User Manual - Page 12
4. Attach the support bar to the ends of the arms. Attaching the support bar | 11 5. Use the hex wrench (a) to fasten each side of the bar with a bolt (A). - Epson P10000 | User Manual - Page 13
. You must attach the support bar to use the paper basket. 1. Make sure you have all the included paper basket parts. 4 bolts (B) and washers 3 clamps 2 plastic connectors Hex wrench (b) Cloth basket 2. Turn the printer around so you are facing the back of the product. 3. Attach three clamps to - Epson P10000 | User Manual - Page 14
onto both ends of the paper basket pole. Note: Make sure the shiny side of the cloth is facing down. 5. Place the basket under the printer with the longer loop on the right (when you face the back of the printer). 6. Slide the plastic connectors onto each of the - Epson P10000 | User Manual - Page 15
14 | Attaching the paper basket 7. Use a hex wrench (b) to fasten each plastic connector with two bolts (B) and two washers. 8. Hook the loop on either side of the basket around each plastic connector. - Epson P10000 | User Manual - Page 16
Attaching the paper basket | 15 9. On the front of the product, wrap the end of the basket around the support bar. 10. Hook the plastic connectors at the end of the paper basket onto the metal pegs on the support bar. - Epson P10000 | User Manual - Page 17
cord Completing setup and connecting the power cord 1. Unlock the casters and move the printer to its final location. Lock the casters after moving the printer. Note: The casters are only meant for moving the printer a short distance over smooth surfaces. 2. Remove any packing tape and plastic film - Epson P10000 | User Manual - Page 18
Completing setup and connecting the power cord | 17 6. Connect the power cord to the AC inlet on the side of the printer. 7. Attach a cable guide to the side of the printer stand and route the power cord as shown. 8. Plug the power cord into a properly grounded electrical outlet. Caution: Do not use - Epson P10000 | User Manual - Page 19
charging. During the initial installation process, it is normal for most of the ink in each cartridge to be used. The cartridges shipped with your printer are provided mainly to charge the ink system. Make sure you order a new set of cartridges as soon as possible. 1. Press the P power button to - Epson P10000 | User Manual - Page 20
3. Open the ink covers. Installing ink | 19 4. Remove the ink cartridges from their packages, then gently shake each cartridge for about 10 seconds. - Epson P10000 | User Manual - Page 21
6 Photo Black (PK) 7 Matte Black (MK) 8 Dark Gray (DGY) 9 Yellow (Y) 10 Vivid Magenta (VM) Hold each cartridge with the arrow pointing toward the printer, then insert it into its slot until it clicks into place. Make sure you insert each cartridge all the way into the correct slot. - Epson P10000 | User Manual - Page 22
light flashes. Caution: Do not open the front cover or the ink covers, or turn off the printer while it is priming. After ink charging is complete, you need to load paper before the product is ready to print. Installing the internal print server The internal print server allows you to save - Epson P10000 | User Manual - Page 23
two screws securing the option slot cover to the back of the printer, then remove the cover. Note: Make sure you save the option slot cover. Remove the internal print server and re-attach the cover if you ever need to ship the printer. 3. Insert the internal print server into the slot. - Epson P10000 | User Manual - Page 24
. Loading roll paper | 23 5. Turn on the printer and press OK to initialize the drive. Loading roll paper You can use roll paper with a 2- or 3-inch core and a width of up to 44 inches (112 cm) for the SureColor P10000 and 64 inches (162 cm) for the SureColor P20000. Loading roll paper in the - Epson P10000 | User Manual - Page 25
24 | Loading roll paper in the printer 2. Lift the lock lever. Note: Make sure you lift the lock lever completely. If the lever is not completely raised, the lock is still on. 3. Adjust the paper guides to the width of the roll paper. - Epson P10000 | User Manual - Page 26
4. Place the roll on top of the paper guides. Loading roll paper in the printer | 25 5. If necessary, adjust the roll media adapters to fit the core size of the roll paper. 2-inch core: 3-inch core: - Epson P10000 | User Manual - Page 27
26 | Loading roll paper in the printer 6. Release the tension lever on both adapters. 7. Push the adapters into the paper core at both ends of the roll. 8. Lock the tension levers. - Epson P10000 | User Manual - Page 28
to the right until it hits the roll paper guide, then slide it forward into position. 10. Press the button on the control panel. Make sure Roll Paper is selected, and press OK. 11. Insert the paper into the slot until the printer beeps. Note: If the Auto Loading option is set - Epson P10000 | User Manual - Page 29
28 | Loading roll paper in the printer 12. Pull down on the lock lever to lock the paper in place. 13. Close the roll paper cover. it from the paper path and roll it up when you are not printing. Note: See the Quick Reference guide or the online User's Guide for more details on paper handling. - Epson P10000 | User Manual - Page 30
will quickly and automatically perform the most thorough alignment. 1. Make sure the printer is turned on, and that you have loaded paper in the product. Note: Make sure you select the correct paper type on the printer. 2. Press the button. 3. Press the u or d button to select Head Alignment - Epson P10000 | User Manual - Page 31
30 | Connecting to your system Ethernet connection: USB connection: Note: Route the communication cable (USB or Ethernet) through the cable guide he power cord. 3. Plug the other end of the cable into the appropriate port on your computer, network switch, or hub. - Epson P10000 | User Manual - Page 32
and run your product's software package: • www.epson.com/support/p10000 (U.S.) or www.epson.ca/support/p10000 (Canada) • www.epson.com/support/p20000 (U.S.) or www.epson.ca/support/p20000 (Canada) Follow the instructions on the screen to run the setup program. Updating your printer firmware To keep - Epson P10000 | User Manual - Page 33
your network administrator for instructions on assigning an appropriate IP address. A static IP address is recommended. EPSON and SureColor are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. General Notice: Other product names used herein - Epson P10000 | User Manual - Page 34
CPD-51060 Printed in USA
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
 |
 |
Setup
Epson SureColor
®
P-Series
P10000/P20000