Epson P10000 User Manual - Page 17
Completing setup and connecting the power cord, maintenance tanks
View all Epson P10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
16 | Completing setup and connecting the power cord Completing setup and connecting the power cord 1. Unlock the casters and move the printer to its final location. Lock the casters after moving the printer. Note: The casters are only meant for moving the printer a short distance over smooth surfaces. 2. Remove any packing tape and plastic film. Check these areas: • front cover • ink compartment covers • maintenance tanks 3. Open the roll paper cover and remove the tape and packing material. 4. Open the front cover and remove the tape and packing material. Note: Save the packing material in case you need to ship the printer. 5. Close the front cover.
16
|
Completing setup and connecting the power cord
Completing setup and connecting the power cord
1.
Unlock the casters and move the printer to its final location. Lock the casters after moving the printer.
Note:
The casters are only meant for moving the printer a short distance over smooth surfaces.
2.
Remove any packing tape and plastic film. Check these areas:
•
front cover
•
ink compartment covers
•
maintenance tanks
3.
Open the roll paper cover and remove the tape and packing material.
4.
Open the front cover and remove the tape and packing material.
Note:
Save the packing material in case you need to ship the printer.
5.
Close the front cover.