Epson P8000 Quick Reference - Page 24
Printing using the Auto Take-Up Reel, Set the Auto switch
View all Epson P8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Printing using the Auto Take-Up Reel | 23 3. Set the Manual switch on the Auto Take-Up Reel to Backward to take up at least three turns of paper onto the reel. Make sure adequate slack remains between the roll paper and the take-up reel. Printing using the Auto Take-Up Reel Once the Auto Take-Up Reel is installed and paper is attached to it, you can use it to take up your prints. WARNING: Do not touch the Auto Take-Up Reel while it is operating; doing so may result in injury. Turn off the Auto Take-Up Reel before removing the reel; if the reel operates unexpectedly, bodily injury may occur. Note: When using the Auto Take-Up reel, make sure Auto Cut is set to Off in the printer driver. Otherwise, a confirmation message will appear for each print. 1. Set the Auto switch to Forward or Backward, depending on how you set up the paper. 2. Send a print job to the printer. The Auto Take-Up Reel sensor triggers it to take up the slack in the roll paper 1/4 to 1/2 a turn.