Epson Perfection 640U Scanner Basics - Page 16

Hardware Wizard., gray stripes will not perfectly blend together

Get Epson Perfection 640U PDF manuals and user guides View all Epson Perfection 640U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

9. After the scanner software installation is complete, the Screen Calibration utility automatically starts. For the best results from an EPSON ink jet printer, leave the default setting of 1.8. If you are using a different printer or your printouts don't match what you see on screen, you can change the setting. Move the slider to the right or left until the shades of the horizontal gray stripes appear similar. View the screen from a short distance. The gray stripes will not perfectly blend together; however, try to make the two tones match as closely as possible. 10. Click OK to register the calibration setting. You will not need to change the screen calibration again as long as you continue to use the same monitor. If you don't see the Screen Calibration utility, you can access the utility as follows: Double-click the Scanners and Cameras icon in the Control Panel. Click the Properties button. Click the Utility tab, then click the Screen Calibration utility icon. The Screen Calibration utility appears. 11. Click Finish to exit the Add New Hardware Wizard. 12. Now you can install the rest of your scanner software as described on page 20. Setting Up Your Scanner 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
Setting Up Your Scanner
11
9.
After the scanner software installation is complete,
the Screen Calibration utility automatically starts.
For the best results from an EPSON ink jet printer,
leave the default setting of 1.8.
If you are using a different printer or your printouts
don’t match what you see on screen, you can change
the setting. Move the slider to the right or left until
the shades of the horizontal gray stripes appear
similar. View the screen from a short distance. The
gray stripes will not perfectly blend together;
however, try to make the two tones match as closely
as possible.
10. Click
OK
to register the calibration setting.
You will not need to change the screen calibration again as long as you
continue to use the same monitor.
If you don’t see the Screen Calibration utility, you can access the utility as
follows: Double-click the Scanners and Cameras icon in the Control Panel.
Click the Properties button. Click the Utility tab, then click the Screen
Calibration utility icon. The Screen Calibration utility appears.
11. Click
Finish
to exit the Add New
Hardware Wizard.
12. Now you can install the rest of your scanner software as described on page 20.