Epson PictureMate 400 - PM400 Quick Guide and Warranty - Page 12
Replacing the Ink Cartridge
View all Epson PictureMate 400 - PM400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Replacing the Ink Cartridge Make sure you have a new ink cartridge before you begin. You must install the new cartridge immediately after removing the old one. Caution: Do not open the ink cartridge package until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Note: Leave the expended cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge. 1. Turn on your product. 2. If an ink cartridge is expended, you see a message on the LCD screen. Press the OK button. If you're replacing a cartridge before you see a message on the LCD screen, press if necessary, then select Setup > Maintenance > Ink Cartridge Replacement. Press the OK button to proceed. 3. Unpack the ink cartridge and completely remove the yellow tape only. Caution: Do not remove any other labels or seals, or ink may leak. 12 Replacing the Ink Cartridge