Epson PowerLite 98 User Manual - Page 43
Connecting to a Wired Network, Selecting Wired Network Settings, Parent topic
View all Epson PowerLite 98 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Connecting to a Wired Network To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better. 1. Connect one end of the network cable to your network hub, switch, or router. 2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port. 1. Turn on the projector. 2. Press the Menu button. 43
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1.
Connect one end of the network cable to your network hub, switch, or router.
2.
Connect the other end of the cable to the projector's
LAN
port.
Parent topic:
Wired Network Projection
Selecting Wired Network Settings
Before you can project from computers on your network, you must select the network settings for the
projector using its menu system.
Note:
Make sure you already connected the projector to your wired network using the
LAN
port.
1.
Turn on the projector.
2.
Press the
Menu
button.
43