Epson PowerLite Pro Cinema 6030UB User Manual - Page 98
Power light, Status light, Lamp light, Status and solution, High Altitude, Projector is too hot
View all Epson PowerLite Pro Cinema 6030UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Power light Blue Status light Flashing blue Lamp light Temp light Off Off Flashing blue Varies Off Flashing orange Off Flashing blue Off Orange Status and solution Shutting down; when the Status light stops flashing, you can unplug the projector Projector is too hot • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • Make sure the environmental temperature is not too hot Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help 98