Epson RX500 User's Guide - Page 86
Windows and OS 8.6 to 9.x, The Epson PhotoStarter setup assistant
UPC - 010343848467
View all Epson RX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
If the RX500 is connected to the computer, you'll see the following message on your screen the first time you insert a memory card: This means you have to set up your computer to use the card reader feature. Follow the instructions below for your operating system. Windows and OS 8.6 to 9.x 1. Make sure your RX500 is turned on and connected to your computer. 2. Open the memory card cover: 3. Make sure the memory card light (next to the memory card slots) is off and that no cards are in any of the slots. Then insert a card into the correct slot (see page 84 to identify the slot you need). Memory card cover Note: It won't be possible to insert the card fully; this is normal. 4. If you see a screen asking you to choose a program to launch this action, select Startup CardMonitor, click the checkbox for Always do the selected action, and click OK. 5. When you see this message, click Next: 6. The Epson PhotoStarter setup assistant opens. Follow the instructions on the screen to change any settings from the defaults and complete the setup steps. If you don't change any settings, PhotoStarter automatically copies the images on your memory card to your hard drive and opens PhotoImpression. 86 Using Memory Cards