Epson RX700 Basics - Page 75
Solving Problems, Problems and Solutions, Setup and Software Installation Problems - stylus photo software download
UPC - 010343853775
View all Epson RX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Solving Problems If you have a problem with your Stylus Photo RX700, check the messages on the RX700 screen, run a nozzle check (see page 72), or see "Problems and Solutions" below. Tip: It's a good idea to check Epson's web site periodically for possible updates to your software. Visit http://support.epson.com and check the section for your product to see if there is new software available for downloading to your computer. See these sections: ■ "Problems and Solutions" below ■ "Where To Get Help" on page 83 Problems and Solutions Check the solutions below if you're having trouble using your RX700. Setup and Software Installation Problems The Stylus Photo RX700 makes noise after you turn it on. ■ Make sure the scanner lock is in the unlocked position, as shown on the Start Here sheet. After releasing it, turn off the RX700, wait a moment, then turn it back on. ■ It is normal for the RX700 to make whirring sounds after you turn it on. The Stylus Photo RX700 makes noise after ink cartridge installation. ■ When you install ink cartridges, the RX700 must charge its ink delivery system. This takes about 3½ minutes. Do not turn off the RX700, or it will use extra ink the next time you turn it on. ■ Make sure no packing tape or material remains inside the RX700. Turn it off, wait a moment, then turn it back on. 75