Epson Stylus CX4600 Product Information Guide - Page 3

Printable Area, Standard Margins, Scanning, Mechanical, Electrical, Environmental, USB Interface - software

Page 3 highlights

Epson Stylus CX4600 Printable Area A B-L B-R C Single sheets or cards Standard Margins Envelopes A: top margin B-L: left margin B-R: right margin C: bottom margin Single sheets 0.12 inch (3.0 mm) 0.12 inch (3.0 mm) 0.12 inch (3.0 mm) 0.12 inch (3.0 mm) Envelopes 0.12 inch (3.0 mm) 0.2 inch (5.0 mm) 0.2 inch (5.0 mm) 0.79 inch (20.0 mm) Note: You can print borderless prints on some media types, or you can reduce the margin size to 0.06 inch (1.5 mm) when you select Photo Paper on the control panel (but do not select Fit to Page). Depending on the type of paper, the print quality may deteriorate in the bottom area of the print, or this area may be smeared. Before printing large jobs with reduced margins, print a single sheet to confirm print quality. Scanning Scanner type Photoelectric device Effective pixels Document size Scanning resolution Output resolution Color separation Image data Gamma correction Light source Reliability Interface Flatbed color image scanner Color CIS line sensor 5,100 × 7,020 pixels at 600 dpi, 100% Letter (8.5 × 11.0 inches) or A4 (8.5 × 11.7 inches); reading area is selectable with software 600 dpi (main), 1200 dpi (sub) 50 to 4800 dpi (adjustable in 1-dpi increments), 7200 dpi, or 9600 dpi; resolutions higher than 4800 are interpolated by software RGB color filters on CCD 16 bits per pixel per color internal 1 to 8 bits per pixel per color external User defined 2 level RGB Three Color LCD 30,000 cycles of carriage movements (main unit MCBF) USB 2.0 compatible Mechanical Paper feed method Paper path Sheet feeder capacity Dimensions Weight Friction Sheet feeder, top feed Approx. 100 sheets at 17 lb (64 g/m2) 16.9 × 13.5 × 6.7 inches (W × D × H) 430 × 344 × 170 mm (W × D × H) Approx. 14.6 lb (6.6 kg) Electrical Input voltage range* 90 to 132 V Rated frequency range 50 to 60 Hz Rated current 0.4 A Power consumption Approx. 11 W (ISO 10561 Letter Pattern) Approx. 2.5 W in sleep mode Approx. 0.2 W in power-off mode * Check the label on the back of this product for voltage information. Environmental Temperature Operation 50 to 95 °F (10 to 35 °C) Storage* - 4 to 140 °F (- 20 to 60 °C) 1 month at 104 °F (40 °C) 120 hours at 140 °F (60 °C) Humidity (without condensation) Operation 20 to 80% RH Storage* 5 to 85% RH * Stored in shipping container USB Interface Standard Bit rate Data encoding Connector Recommended cable length Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Device Class Definition for Printing Devices version 1.1; Universal Serial Bus Mass Storage class Bulk-Only Transport Revision 1.0 12 Mbps (full speed device) NRZI USB Series B 6.6 feet (2 meters) or less 6/04 Epson Stylus CX4600 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

Epson Stylus CX4600
6/04
Epson Stylus CX4600
- 3
Printable Area
Standard Margins
Note:
You can print borderless prints on some media types, or you can
reduce the margin size to 0.06 inch (1.5 mm) when you select
Photo Paper
on the control panel (but do not select
Fit to Page
).
Depending on the type of paper, the print quality may deteriorate in
the bottom area of the print, or this area may be smeared. Before
printing large jobs with reduced margins, print a single sheet to
confirm print quality.
Scanning
Scanner type
Flatbed color image scanner
Photoelectric device
Color CIS line sensor
Effective pixels
5,100 × 7,020 pixels at 600 dpi,
100%
Document size
Letter (8.5 × 11.0 inches) or A4
(8.5 × 11.7 inches); reading area is
selectable with software
Scanning resolution
600 dpi (main), 1200 dpi (sub)
Output resolution
50 to 4800 dpi (adjustable in 1-dpi
increments), 7200 dpi, or 9600 dpi;
resolutions higher than 4800 are
interpolated by software
Color separation
RGB color filters on CCD
Image data
16 bits per pixel per color internal
1 to 8 bits per pixel per color external
Gamma correction
User defined 2 level
Light source
RGB Three Color LCD
Reliability
30,000 cycles of carriage movements
(main unit MCBF)
Interface
USB 2.0 compatible
Mechanical
Paper feed method
Friction
Paper path
Sheet feeder, top feed
Sheet feeder
capacity
Approx. 100 sheets at 17 lb (64 g/m
2
)
Dimensions
16.9 × 13.5 × 6.7 inches (W × D × H)
430 × 344 × 170 mm (W × D × H)
Weight
Approx. 14.6 lb (6.6 kg)
Electrical
Input voltage range*
90 to 132 V
Rated frequency
range
50 to 60 Hz
Rated current
0.4 A
Power consumption
Approx. 11 W (ISO 10561 Letter
Pattern)
Approx. 2.5 W in sleep mode
Approx. 0.2 W in power-off mode
*
Check the label on the back of this product for voltage information.
Environmental
Temperature
Operation
50 to 95 °F (10 to 35 °C)
Storage*
– 4 to 140 °F (– 20 to 60 °C)
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation
20 to 80% RH
Storage*
5 to 85% RH
*
Stored in shipping container
USB Interface
Standard
Based on Universal Serial Bus
Specifications Revision 2.0, Universal
Serial Bus Device Class Definition for
Printing Devices version 1.1;
Universal Serial Bus Mass Storage class
Bulk-Only Transport Revision 1.0
Bit rate
12 Mbps (full speed device)
Data encoding
NRZI
Connector
USB Series B
Recommended
cable length
6.6 feet (2 meters) or less
Single sheets
Envelopes
A: top margin
0.12 inch (3.0 mm)
0.12 inch (3.0 mm)
B-L: left margin
0.12 inch (3.0 mm)
0.2 inch (5.0 mm)
B-R: right margin
0.12 inch (3.0 mm)
0.2 inch (5.0 mm)
C: bottom margin
0.12 inch (3.0 mm)
0.79 inch (20.0 mm)
A
B-L
B-R
C
Single sheets or cards
Envelopes