Epson Stylus Pro 4900 Designer Edition User's Guide - Page 19
Chap 1-Setting Up the Printer, Unpacking and Connecting the Printer
View all Epson Stylus Pro 4900 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
21 Chapter 1: Setting Up the Printer This chapter includes the following information: • Unpacking and connecting the Epson Stylus Pro 4900 • Installing ink • Connecting to your computer or network • Configuring the printer for a network • Installing the printer software for Windows or Macintosh • Updating the printer firmware Unpacking and Connecting the Printer Follow these steps to unpack the printer and connect the power cord. WARNING: The printer weighs about 115 pounds (52 kg) and should be lifted by two people. Before you begin, make sure you have sufficient space to set up and use the printer. 1. Remove the tape from the front of the paper tray. 2. Lift the edge of the output tray to remove it. 21
21
21
This chapter includes the following information:
•
Unpacking and connecting the Epson Stylus Pro 4900
•
Installing ink
•
Connecting to your computer or network
•
Configuring the printer for a network
•
Installing the printer software for Windows or Macintosh
•
Updating the printer firmware
Unpacking and Connecting the Printer
Follow these steps to unpack the printer and connect the power cord.
Before you begin, make sure you have sufficient space to set up and use the
printer.
1.
Remove the tape from the front of the paper tray.
2.
Lift the edge of the output tray to remove it.
Chapter 1:
Setting Up
the Printer
WARNING:
The printer
weighs about 115 pounds
(52 kg) and should be lifted
by two people.