Epson SureColor F2100 Users Guide - Page 166

• You can adjust the delay time before the printer enters sleep mode in the Administrator menu. Parent topic: Solving Printer Problems Related references Administrator Menu Settings Solving Printing Problems Check these sections if you have problems printing with your product. Nothing Prints Cannot Print Over a Network Print Head Moves But Nothing Prints Platen Height Error Is Displayed While Printing Message Is Displayed After Cleaning the Encoder Strip (Carriage Scale) Printing Is Slow or Stops Intermittently Cannot Access the USB Memory Device Red Light Shines Inside the Printer Forgot the Network Password Parent topic: Solving Problems Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your printer is turned on . • Make sure any interface cables are connected securely at both ends. If you have a spare cable, try connecting with the spare cable. • Check the model and specifications of the interface cable to see if the cable is appropriate for your computer and printer. • If a USB memory device is connected to the printer, Garment Creator saves the print job to the USB memory device first and then to the printer instead of sending the print job directly to the printer. Therefore, printing does not start until the data has been saved to the USB memory device. Remove the USB memory device before sending a print job to speed up the printing process. • If you connected your printer to a USB hub, make sure it is a first-tier hub. If it still does not print, connect your printer directly to your computer instead of the hub. • Make sure the USB hub is recognized correctly on the computer. Disconnect all USB hubs from the computer and connect the printer directly to the computer's USB port. 166