Epson TM-L90 Plus with Peeler Technical Reference Guide - Page 51

TM-L90/TM-L90 Peeler Model Technical Reference Guide Msw7 (only for 39* models) Msw Function 7-1 (Reserved) to 7-7 7-8 Function when FEED button is pressed Off - Feed to the next print starting position On - Feed to the manual cutting position Initial Msw Setting Msw Setting setting utility Mode Off Off ✓ ✓ [Msw7-8] is enabled only in the continuous issuing mode. When [Msw7-8] is Off, the printer feeds paper to the next print starting position, if the FEED button is pressed. When [Msw7-8] is On, if you press the FEED button once, the printer feeds one piece of the label to the manual cutting position. Then if you press the FEED button again, the printer feeds the next label to the print starting position. By pressing the FEED button repeatedly, the operation described above is repeated. Msw8 Msw Function Initial Msw Setting Msw Setting Off On setting utility Mode 8-1 User operation for recovery Recovers by Does not Off ✓ ✓ from paper layout error pressing FEED recover by button pressing FEED button 8-2 User operation for recovery Send the error Send the error Off ✓ ✓ from paper layout error recovery recovery command or command open/close the cover 8-3 Paper out LED state in a paper LED On LED Off Off ✓ ✓ near-end 8-4 Maximum length of automatic 160 mm 300 mm Off ✓ ✓ paper measurement 8-5 Space insertion at left and right side of barcode print Disabled Enabled Off ✓ 8-6 Paper feed to the print starting Enabled Disabled Off ✓ ✓ position when power is turned on 8-7 (Reserved) - - Off 8-8 Printer cover open during operation Automatic Recoverable Off ✓ recoverable error error If [Msw8-1] is OFF, the paper is determined automatically if the printer recovers from the paper layout error. Furthermore, the results of automatic paper determination are overwritten if the settings for paper layout are already saved in the NV memory. Setup 51