Epson TM-L90 Plus with Peeler Technical Reference Guide - Page 74
Connecting to the Drawer
View all Epson TM-L90 Plus with Peeler manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3.3 Connecting to the Drawer CAUTION: Be sure to connect a drawer that meets printer specifications. Connecting a drawer of the wrong specifications may result in damage to both the drawer and the printer. Never connect the telephone line to the drawer kick connector (labeled "DK"). Doing so may result in damage to both the telephone line and the printer. Never connect the drawer cable to the customer display connector (labeled "DM-D"). Doing so may result in damage to both the drawer cable and the printer. 1. Connect the drawer cable to the drawer kick connector (labeled DK) on the connector panel. Drawer kick connector Note: The connector panel varies depending on the models. 3.3.1 Setting the internal buzzer (for models with an internal buzzer) Models with the buzzer function can beep the buzzer when the drawer is opened, by setting the properties of the driver or outputting a pulse signal by a command. The internal buzzer cannot change the buzzer volume and sound pattern but can change the buzzer frequency. When using the internal buzzer, you need to enable the internal buzzer with the memory switch. The buzzer setting is performed by setting the memory switches for the buzzer and specifying connector pin numbers to which a command outputs a pulse signal, as shown in the table below. For information about the memory switches, see "Memory Switch Settings" on page 44. Memory switch Specified connector pin ON Buzzer frequency (Pulse 1) Drawer kick connector pin Buzzer beeps. 2 Buzzer frequency (Pulse 2) Drawer kick connector pin Buzzer beeps. 5 OFF Buzzer does not beep. Buzzer does not beep. Initial setting OFF ON 74 Connecting to the Host Computer and Options