Epson TM-L90 Plus with Peeler Technical Reference Guide - Page 73
Connect the 10BASE-T/100BASE-TX cable to the 10BASE-T/100BASE-TX Ethernet
View all Epson TM-L90 Plus with Peeler manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Connection procedure TM-L90/TM-L90 Peeler Model Technical Reference Guide CAUTION: Connecting devices directly to LAN cables that are installed outdoors will expose them to damage from power surges caused by lightning and other inductive sources. It is best to make sure that devices without proper surge protection are cushioned by being connected through devices that do have surge protection. Otherwise, it is better not to connect them to outdoor lines. Never attempt to connect the customer display cable, drawer kick cable or the standard telephone line cable to the 10BASE-T/100BASE-TX Ethernet connector. 1. Confirm that the power supplies for both the printer and the host computer have been turned off. 2. Connect the 10BASE-T/100BASE-TX cable to the 10BASE-T/100BASE-TX Ethernet connector by pressing firmly until the connectors click. Note: For the various methods of setting the Ethernet interface, refer to the Technical Reference Guide for the Ethernet interface board. Connecting to the Host Computer and Options 73