Epson VS250 Operation Guide - Epson Projector Management v5.00 - Page 10
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless), Network
View all Epson VS250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2. Connect a LAN cable to the projector. 3. Turn on the projector. 4. Press the Menu button on the remote control or the control panel, select the Network menu, and select Network Configuration. 5. Select Wired LAN. A screen like one of the following is displayed. 6. Set DHCP to Off and enter the projector's IP Address, Subnet Mask, and Gateway Address values as necessary. 7. When you have finished making settings, select Setup Complete or Complete, and follow the onscreen instructions to save your settings and exit the menus. Parent topic: Selecting Projector Network Settings Related references Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired) Setting Up a Projector to Connect in Advanced Connection Mode (Wireless) To connect a computer to the projector over a wireless LAN, you need to select network settings on the computer and the projector. 1. Contact your network administrator and write down the settings for the access point, such as the SSID and security settings. 10