Epson WorkForce Enterprise WF-C21000 Users Guide - Page 342
Caution, Warning, flush them immediately with water. If ink gets into your mouth
View all Epson WorkForce Enterprise WF-C21000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out. Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1. Open the ink cartridge cover. 2. Push in the ink cartridge that you want to remove until it pops out, then slowly pull it all the way out. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. 3. Gently shake the new ink cartridge horizontally back and forth about 15 times, then remove it from its package. Caution: Do not remove any labels or seals, or ink will leak. Do not touch the green chip or the ink supply port on the cartridge. Install the new cartridge immediately after removing the old one; if you do not, the print head may dry out and be unable to print. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children. 4. Insert the new cartridge and push it all the way in until it clicks into place. 5. Close the ink cartridge cover. The home screen appears and the product starts charging the ink. This may take a few minutes. A status message counts down until the product is ready. When the status message disappears, ink replacement is complete. 342