Epson WorkForce Enterprise WF-C21000 Users Guide - Page 384
Paper Jam Problems, Paper Ejection Problems, Solving Problems Printing from a Computer
View all Epson WorkForce Enterprise WF-C21000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 384 highlights
Related references Automatic Document Feeder (ADF) Specifications Related tasks Cleaning the Automatic Document Feeder Placing Originals in the Automatic Document Feeder Paper Jam Problems If a paper jam occurs in the product, a message appears on the LCD screen. Follow the on-screen instructions to locate the paper jam and remove the paper. Caution: Never touch the buttons on the control panel while your hand is inside the product. If the product starts operating, it could cause an injury. Be careful not to touch the protruding parts to avoid injury. Remove the jammed paper carefully or you may damage the product. Caution: When using the optional hole punch unit with the optional staple or booklet finisher, adjust the printed area so it does not overlap with the holes being punched. Punching holes over any printed area may cause hole punch failure or a paper jam. Parent topic: Solving Paper Problems Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint. • If paper falls from the output tray, extend the paper stopper. • If paper falls after printing from the paper tray, extend the paper stopper or place a box to make sure the paper does not touch the floor. • If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint. Parent topic: Solving Paper Problems Solving Problems Printing from a Computer Check these sections if you have problems while printing from your computer. Nothing Prints 384