Epson WorkForce Enterprise WF-M21000 Users Guide - Page 359
LCD screen message, Condition/solution, Line Type, Dial Tone Detection, Job/Status, Printer Status
View all Epson WorkForce Enterprise WF-M21000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
LCD screen message Condition/solution Cannot print because XX is out of order. You can print from another cassette. Turn the product off and then back on again. Reinsert the indicated paper cassette. If the error persists, contact Epson for support. HDD error. Turn the printer off and back on again. If the error continues, contact Epson support. The hard disk drive is damaged. You may not be able to receive faxes (models equipped with optional fax board) or copy or print documents that contain images. Copying more than 50 pages of Text & Image A4 documents may fail. Contact Epson for support. XX are nearing the end of their service life. A consumable part in your product needs to be replaced. Contact Epson for support. XX are nearing the end of their service life. Contact Epson for support. XX is at the end of its service life. Replace it. You need to replace the following ink Replace the indicated ink cartridge(s). cartridge(s). Confirm the procedure, and then replace them. No dial tone detected. (models with optional fax board installed) Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. Use # instead of the actual access code when entering an outside fax number. If you still cannot send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial Tone Detection setting may cause the product to drop the first digit of a fax number.) Failed to receive faxes because the Select Job/Status > Printer Status and resolve any errors that fax data capacity is full. Touch the are preventing faxes from printing. Make sure the product is Job/Status at the bottom of the Home connected to a computer and it is turned on, or connect a Screen for details. (Models equipped memory device to the product. with optional fax board) The combination of the IP address There is a problem with the network connection to your product. and the subnet mask is invalid. See Set up your product on the network again. your documentation for more details. 359