Epson WorkForce Pro WP-4540 Quick Guide - Page 27
Faxing Problems, Print Quality Problems, Error Correction Mode settings. - ink
View all Epson WorkForce Pro WP-4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3. If documents are still jammed, raise the ADF input tray and carefully remove the jammed pages. Faxing Problems ■ Make sure the recipient's fax machine is turned on and working. ■ Make sure the LINE port on the product is connected to a telephone wall jack. Verify that the telephone wall jack works by connecting a phone to it. ■ Make sure the light is turned on to receive faxes automatically. ■ If you use a voicemail service, you should turn off Auto Answer. Otherwise, calls or faxes may be inadvertently received by your voicemail. ■ If the line has static, press Setup, then select Fax Settings, and then Communication. Turn off the V.34 and ECM (Error Correction Mode) settings. ■ If the product is connected to a DSL phone line, you must have a DSL filter connected to the phone jack. Contact your DSL provider for the filter. ■ If you connected a telephone or answering machine, make sure it is connected to the EXT. port. Do not use a phone line splitter. Print Quality Problems ■ Make sure your paper is loaded printable side down (usually the whiter or brighter side) in the cassette (or printable side up in the rear MP tray). ■ For the best print quality, use Epson papers (see page 3) and genuine Epson ink cartridges (see page 21). ■ Make sure the paper type setting on the control panel or in your printer software matches the type of paper loaded in the printer (see page 9). ■ If you notice light or dark bands across your printouts or they are too faint, run a nozzle check (see page 18) to see if the print head needs cleaning. ■ If you notice jagged vertical lines, you may need to align the print head. See the online User's Guide for instructions. Problems and Solutions 27