Fisher and Paykel DE4024P2 User Guide - Page 14

supported service technician if you are in doubt as to whether the appliance is properly

Get Fisher and Paykel DE4024P2 PDF manuals and user guides View all Fisher and Paykel DE4024P2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

INSTALLATION INSTRUCTIONS Electrical connection information for electric dryers For direct wire connections: ! WARNING! Fire Hazard z Use 10 gauge copper wire. z Use a UL-listed strain relief. z Disconnect power before making electrical connections. z Connect neutral wire (white or center wire) to center terminal. z Ground wire (green or bare wire) must be connected to green ground connector. z Connect remaining two supply wires to remaining two terminals. z Securely tighten all electrical connections. z Replace the terminal block cover. z Failure to do so can result in death, fire or electrical shock. Grounding instructions For a permanently connected dryer: This dryer must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal on the appliance. WARNING! Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician, or a Fisher & Paykel trained and supported service technician if you are in doubt as to whether the appliance is properly grounded. SAVE THESE INSTRUCTIONS 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
12
INSTALLATION INSTRUCTIONS
Electrical connection information for electric dryers
For direct wire connections:
!
WARNING!
Fire Hazard
z
Use 10 gauge copper wire.
z
Use a UL-listed strain relief.
z
Disconnect power before making electrical connections.
z
Connect neutral wire (white or center wire) to center terminal.
z
Ground wire (green or bare wire) must be connected to green
ground connector.
z
Connect remaining two supply wires to remaining two terminals.
z
Securely tighten all electrical connections.
z
Replace the terminal block cover.
z
Failure to do so can result in death, fire or electrical shock.
Grounding instructions
For a permanently connected dryer:
This dryer must be connected to a grounded metal, permanent wiring system, or
an equipment-grounding conductor must be run with the circuit conductors and connected
to the equipment-grounding terminal on the appliance.
WARNING!
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician, or a Fisher & Paykel trained and
supported service technician if you are in doubt as to whether the appliance is properly
grounded.
SAVE THESE INSTRUCTIONS