Fisher and Paykel DE4024P2 User Guide - Page 18
Final setup, Level the dryer, Plug dryer in, Dryer startup
![]() |
View all Fisher and Paykel DE4024P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION INSTRUCTIONS Final setup Level the dryer 1 Stand the dryer upright near the final location and adjust the four leveling legs at the corners to ensure that the dryer is level from side to side and front to rear. Levelling the feet Plug dryer in 2 Note: stacking installations may require a power cord up to 6 feet (1.8m) in length. Ensure proper ground exists before use. Dryer startup 3 Press the 'POWER' button. Note: if the dryer has been exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing 'POWER'. Otherwise, the display will not come on. The dryer is now ready for use. 49-90571 16
![](/manual_guide/products/fisher-paykel-de4024p2-user-guide-00bfa7d/18.png)
16
INSTALLATION INSTRUCTIONS
Final setup
Level the dryer
1
Stand the dryer upright near the final location
and adjust the four leveling legs at the corners to
ensure that the dryer is level from side to side and
front to rear.
Plug dryer in
2
Note: stacking installations may require a power
cord up to 6 feet (1.8m) in length.
Dryer startup
3
Press the ‘POWER’ button.
Note: if the dryer has been exposed to temperatures
below freezing for an extended period of time, allow
it to warm up before pressing ‘POWER’. Otherwise,
the display will not come on.
The dryer is now ready for use.
Ensure proper
ground exists
before use.
Levelling the feet