Fisher and Paykel DE4024P2 User Guide - Page 31
Fault codes, When a continuous series of beeps is sounded, all the lights turn off on the control
View all Fisher and Paykel DE4024P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
FAULT CODES EN When a continuous series of beeps is sounded, all the lights turn off on the control panel and a number appears on the display, a fault has occurred. The dryer will automatically enter this mode if a fault occurs. The fault code will be displayed as followed by a number on the digital display. To stop the beeps, touch any button then perform the following steps: 1 Turn your machine off at the power point. 2 Wait one minute and turn it back on. 3 Check your machine is installed correctly (refer to the 'Installation instructions' section). 4 Remove your dryer load and retry. 5 Perform a 'Time Dry' cycle, eg 'Time Dry' (30 mins). 6 If the fault re-occurs repeat steps 1 and 2. 7 If the machine still will not work you will be required to call a properly trained installer to arrange service (refer to the 'Limited warranty' section). Record the fault code number displayed and the serial number of your dryer (located on the inside of the door below the glass) before calling. The fault code will indicate to the service technician what the problem could potentially be. If a fault code is being displayed, you can still turn your dryer off by pressing 'POWER'. 29