Fisher and Paykel DE4024P2 User Guide - Page 17
Connecting the drain hose, Draining water without using the water tank
View all Fisher and Paykel DE4024P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION INSTRUCTIONS EN Connecting the drain hose Draining water without using the water tank You can use the dryer without using the water tank by following the procedures below. To connect the drain hose: 1 Disconnect the drain hose A. 2 Connect the drain hose A to the other hole. 3 Connect accessory hose B (long drain hose) adjacent to hose A. z When connecting hose B, take care that the height of the hose does not exceed 58" (147cm). z After connecting the drain hose, you can now directly drain the condensed water to a standpipe or washstand. Back view A A B 4 Over the edge of a wash basin: The drain hose must be placed lower than 58" (147cm). To keep the drain hose spout bent, use the plastic hose guide as supplied with the washer. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving. 5 Assemble the drain hose and the hose guide and fix them with the cable-tie. Do not push the drain hose in the standpipe any further than 4" (10cm). Pushing the drain hose further in the standpipe can cause leaking. Drain hose Hose guide Cable ties 58" (147cm) Max. 15