Fluke 1550B FE 1550B Users Manual - Page 10

Symbols, Operating the Meter, Turning the Meter On and Off - software

Get Fluke 1550B PDF manuals and user guides View all Fluke 1550B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

1550B Users Manual Symbols Symbols on the Meter and in the manual are explained Table 1. Table 1. Symbols P Conforms to European Union standards. s TUV GS ) W X This product complies with UL3111-1, CAN/CAS C22.2 No.1010.1 for Test and Measurement Equipment Risk of danger. Important information. See Manual. Potentially hazardous voltage T 6 M s Equipment protected by double or reinforced insulation. Do not use in distribution systems with voltages higher than 660 V. Interference is present. Displayed value might be outside of specified accuracy. Ramp mode indicator b Electrical breakdown B Volts AC J Earth Ground Operating the Meter Turning the Meter On and Off To turn the Meter on and off: 1. Press O to turn on the Meter. The Meter performs a self-check, self-calibration, displays the current software version, and starts in the Test Voltage mode. At this point, you can: ⇒ Change test parameters ⇒ Start an insulation test ⇒ View stored test results ⇒ Download test results 2. Press O again to turn off the Meter. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
1550B
Users Manual
4
Symbols
Symbols on the Meter and in the manual are explained Table 1.
Table 1. Symbols
P
Conforms to European Union standards.
s
TUV GS
)
This product complies with UL3111-1, CAN/CAS C22.2 No.1010.1
for Test and Measurement Equipment
W
Risk of danger.
Important information. See Manual.
X
Potentially hazardous voltage
T
Equipment protected by double or reinforced insulation.
6
Do not use in distribution systems with voltages higher than
660 V.
M
Interference is present. Displayed value might be outside of
specified accuracy.
s
Ramp mode indicator
b
Electrical breakdown
B
Volts AC
J
Earth Ground
Operating the Meter
Turning the Meter On and Off
To turn the Meter on and off:
1.
Press
O
to turn on the Meter.
The Meter performs a self-check, self-calibration, displays the current
software version, and starts in the Test Voltage mode.
At this point, you can:
⇒
Change test parameters
⇒
Start an insulation test
⇒
View stored test results
⇒
Download test results
2.
Press
O
again to turn off the Meter.