Fluke 1550B FE 1550B Users Manual - Page 22

1550B Users Manual Following termination of an insulation test the Meter beeps when a potentially hazardous voltage remains on the test terminals due to charged-circuit capacitance or from the presence of an external voltage. 4. When the test is terminated, STORE RESULT? is displayed. If appropriate, store the test results as described in the next procedure. Otherwise, terminate the STORE RESULT? prompt by pressing the d button. The results are not stored. Storing the Test Results Upon completion of an insulation test, the Meter displays STORE RESULT? as a prompt to save the measurement results for future use. The Meter includes enough memory to store the results of 99 insulation tests for future use. To store the results of an insulation test use the following procedure: 1. Press V to save the measurement results. The Meter will assign and display a sequential tag number (00 to 99) to identify the measurement. If the tag number is acceptable, press the e button to store the data. If a different tagging convention is required, proceed as follows to provide a custom 4-character tag. a. Notice that an * is blinking on the display. This is the first of the four characters available for tagging the test results. Repeatedly press the scroll R button to cycle through the character positions. b. At each character position use the V and d buttons to assign a character (0-9, A-Z). c. Press the e button to store the results. 16