Fluke 1577 FE 1587-1577 Users Manual - Page 17

Table 3. Buttons, Button, Description, In MIN MAX AVG or Hz mode, this button - insulation test multimeters

Get Fluke 1577 PDF manuals and user guides View all Fluke 1577 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Table 3. Buttons Button Description Press to freeze the displayed value. Press again to release the display. When a reading changes, the display updates and the Meter beeps. h In MIN MAX AVG or Hz mode, this button operates a display hold. In Insulation Test mode, this schedules a test lock the next time you press t on the Meter or on the remote probe. The test lock acts to hold down the button until your press h or t again to release the lock. m (1587 and 1587T only) Press to start retaining maximum, minimum, and average values. Press successively to display maximum, minimum, and average values. Press and hold to cancel MIN MAX AVG. Insulation Multimeters Buttons Button Description f (1587 and 1587T only) Activate frequency measurement. r Changes Ranging mode from Auto (default) to Manual Ranging mode. Press and hold to return to Auto Ranging mode. H Turns the backlight on and off. The backlight goes off after 10 minutes. t Initiates an insulation test when the rotary switch is on the INSULATION position. Causes the Meter to source (output) a high voltage and measure insulation resistance. The blue button. Functions as a shift key. G Press to access blue functions on the rotary switch. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Insulation Multimeters
Buttons
7
Table 3. Buttons
Button
Description
h
Press to freeze the displayed value. Press
again to release the display.
When a reading changes, the display
updates and the Meter beeps.
In MIN MAX AVG or Hz mode, this button
operates a display hold.
In Insulation Test mode, this schedules a
test lock the next time you press
t
on
the Meter or on the remote probe. The test
lock acts to hold down the button until your
press
h
or
t
again to release the
lock.
m
(1587 and
1587T
only)
Press to start retaining maximum, minimum,
and average values. Press successively to
display maximum, minimum, and average
values. Press and hold to cancel
MIN MAX AVG.
Button
Description
f
(1587 and
1587T
only)
Activate frequency measurement.
r
Changes Ranging mode from Auto (default)
to Manual Ranging mode. Press and hold to
return to Auto Ranging mode.
H
Turns the backlight on and off. The backlight
goes off after 10 minutes.
t
Initiates an insulation test when the rotary
switch is on the
INSULATION
position. Causes
the Meter to source (output) a high voltage
and measure insulation resistance.
G
The blue button. Functions as a shift key.
Press to access blue functions on the rotary
switch.