Foxconn Cinema Deluxe English Manual. - Page 31
► Smart Boot Menu, ► IDE Detect Time Out, ► MPS Revision, ► Quiet Boot, ► Quick Boot, ► Bootup Num-
View all Foxconn Cinema Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Boot Setting Configuration CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Boot Setting Configuration Smart Boot Menu IDE Detect Time Out MPS Revision Quiet Boot Quick Boot Bootup Num-Lock ► Boot Device Priority ► Hard Disk Drives ► Removable Drives ► CD/DVD Drives [EEnnaabblleedd] [35] [1.4] [Enabled] [Enabled] [ON] [Press Enter] [Press Enter] [Press Enter] [Press Enter] Help Item Smart Boot Menu definition 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F2/F3:Change Color F9:Optimized Defaults ► Smart Boot Menu When PC starts, you can press [F11] key to enter smart boot menu. If [Disabled] is selected, then pressing [F11] has no function. This also prevents user without password trying to get into your computer through smart boot menu. ► IDE Detect Time Out This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking time is over the set value, the system will skip it. ► MPS Revision This feature is only applicable to multiprocessor motherboards as it specifies the version of the MPS that the motherboard will use. The MPS is a specification by which PC manufacturers design and build CPU architecture systems with two or more processors. MPS 1.1 was the original specification. MPS version 1.4 adds extended configuration tables for improved support of multiple PCI bus configurations and greater expandability in the future. In addition, MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI bridge. If your operating system comes with support for MPS 1.4, you should keep the setting as the default 1.4. You also need to enable MPS 1.4 support if you need to make use of the secondary PCI bus on a motherboard that doesn't come with a PCI bridge. You should only leave it as 1.1 only if you are running an older operating system that only supports MPS 1.1. ► Quiet Boot This item is used to enable/disable the quiet boot. [Disabled] : Displays the normal POST messages. [Enabled] : Displays OEM customer logo instead of POST messages. ► Quick Boot While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the time needed to boot the system. ► Bootup Num-Lock This item defines if the keyboard Num Lock key is active when your system is started. The available settings are: On (default) and Off. ► Boot Device Priority 24