Foxconn Cinema Deluxe English Manual. - Page 37

Integrated Peripherals CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Integrated Peripherals ► SATA Configuration ► USB Configuration LAN Controller LAN Boot ROM 1394 FireWire USB Controller Azalia HD Audio Controller Serial Port Address Ir Port Address Ir Port Mode Ir Port Duplex Mode [Press Enter] Help Item [Press Enter] [Enabled] Configure the SATA [Disabled] device(s). [Enabled] [Enabled] [Enabled] [3F8/IRQ4] [2F8/IRQ3] [IrDA] [Half Duplex] 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F2/F3:Change Colors F9:Optimized Defaults ► SATA Configuration / USB Configuration Press to go to relative submenu. ► LAN Controller This item is used to enable or disable the LAN controller. ► LAN Boot ROM This item is used to enable or disable the LAN boot optional ROM. A LAN boot ROM lets you set up a diskless workstation on the network. By installing a boot ROM in the network board, you can enable a client PC system on the network to be booted remotely. ► 1394 FireWire This item is used to enable or disable the onboard 1394 controller. ► USB Controller This item is used to enable or disable the USB controller. ► Azalia HD Audio Controller This item is used to enable or disable the Azalia HD Audio Controller. ► Serial Port Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 1. ► IR Port Address This item is used to assign the I/O address and interrupt request (IRQ) for the IR port. ► IR Port Mode This item is used to set the IR mode. The available settings are : [IrDA] : An IrDA device for maximum 115200 bit/s. [ASK IR] : A faster IrDA for 1152000 bit/s. ► IR Port Duplex Mode This item enables you to determine the infrared function of the onboard infrared chip. 30