Foxconn Cinema Deluxe English Manual. - Page 34
► Gen2 High Speed Mode, ► Link ASPM, ► Link Width, ► Slot Power Limit, W
View all Foxconn Cinema Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3 PCIe Port #2 Configuration CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. PCIe Port #2 Configuration Gen2 High Speed Mode [Auto] Help Item Link ASPM [Disabled] Link Width [Auto] Enable Gen2 speed Slot Power Limit, W [75] based HW or SW support Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F2/F3:Change Colors F9:Optimized Defaults ► Gen2 High Speed Mode This item is used to select the Generation II speed mode of PCI Express slots. Select [Auto], RC will only advertize Generation II capability; Select [Software Initiated], the speed mode is determined by software initiated; Select [Advertised RC], the speed mode is determined by RC initiated; Select [Disabled], BIOS will turn off Generation II speed mode of PCI Express slots. ► Link ASPM This item is used to select the link mode between ASPMs. ► Link Width This item is used to set the link width between PCI Express slots. ► Slot Power Limit, W This item is used to adjust the power limit of PCI Express slots. You can use [+]/ [-] to change the value or directly input a value from 0 to 255.The default option is [75]. 27