Frigidaire FGIF3061NF Use and Care Guide - Page 35
Important, Notes, Self-cleaning
View all Frigidaire FGIF3061NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Setting a self-clean cycle or a delayed start self-clean cycle Examples: To start an immediate self-cleaning cycle and/or how to add a delay start time of 9:00 o'clock and shut-off self-clean automatically: Step Press 1. Be sure the clock is set with the correct time of day, ALL the oven racks are removed and the oven door is closed. Go to step 5 if you wish to start self-clean immediately. Finish steps 2 thru 6 if setting a delayed start self-clean cycle. 2. Press delay start. 3. Enter 9 0 0. 4. Press start. 5. Press self clean once for a 3-hour clean time, press self clean twice for 4-hour clean and press 3 times for a 2-hour self-clean cycle time. 6. Press start. IMPORTANT As soon as the controls are set, the motor driven door lock will begin to close automatically. "door Loc" will appear in the display (See Fig. 1). DO NOT open the oven door while "door Loc" is on (allow 15 seconds for the oven door to completely lock). Once the door has locked "CLn" will appear in the display indicating the oven will begin the self-clean process (Fig. 2). Fig. 1 Fig. 2 SELF-CLEANING When the self-clean cycle has completed: 1. The time of day and "Hot" will appear in the display window (See Fig.3). 2. Once the oven has cooled down for about 1 hour and "Hot" is no longer displayed the "door OPn" message should appear (Fig. 4). When this message turns off the oven door may be opened. Use caution and avoid possible burns when opening the door after the selfcleaning cycle has completed. The oven may still be VERY HOT. Fig. 3 Fig. 4 If it becomes necessary to stop a self-clean cycle once it has been activated: 1. Press cancel. 2. Allow enough time for the oven to cool and for the "door OPn" message to appear (Fig. 4). When this message turns off the oven door may be opened. If a self-clean cycle was active, then stopped or interrupted by power failure, it may be necessary to run a selfclean cycle again to thoroughly clean the oven. Please be aware that you may need to allow up to four hours before self-clean can be started again. CAUTION To avoid possible burns use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the selfcleaning cycle has completed. The oven may still be VERY HOT. NOTES When the self-clean feature is active you may check the amount of time remaining in the self-clean cycle by pressing the pad once. The oven door will be locked until the range has cooled sufficiently. You will need to allow about 1 additional hour to the time displayed before you can open the oven door. When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel. 35