Frigidaire GCRG3038AD Complete Owners Guide - Page 16

16 Before Setting Surface Controls Install Burner Grates To install burner grates, place the grates flat-side down and align them into the cooktop recess.. Figure 5: Gently move cap for proper placement IMPORTANT • Make sure the burner grates are properly placed on the cooktop before using the surface burners (Figure 5). The grates are designed to rest inside the recess on the cooktop. • Grates should rest flush against each other and against the sides of the recess. • Do not line the area underneath the grates or any part of the cooktop with aluminum foil or with any other lining. Gas surface burner types The cooktop is equipped with gas surface burners with different BTU ratings. The ability to heat food quickly and in large amounts increases as the burner size increases. • Small burners are best used for low-flame heating of small amounts of food. • Standard burners can be used for most surface cooking needs. • The largest burner is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. The large burner is located at the right front position on the cooktop. Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and set the flame size appropriately for the pan. Never allow flames to extend beyond the outer edge of the pan.