Frigidaire GCRG3038AD Complete Owners Guide - Page 32

32 Setting Oven Controls To set a self clean cycle 1. Press Self Clean. --- appears in the display. 2. Press until 3:00 appears in the display for a 3 hour self clean process, or push until 2:00 appears in the display for a 2 hour self clean process. 3. As soon as the controls are set, the motor driven lock will begin to close automatically and the door locked indicator light will flash. Do not open the oven door while the light is flashing (allow about 15 seconds for the oven door to lock). 4. CLn will appear in the display during the self clean cycle, and the door locked light will glow until the self cleaning cycle is complete or cancelled and the oven temperature has cooled. When the self clean cycle has completed: 1. The time of day will appear in the display window, and the Self Clean indicator light and Door Locked light will continue to glow. 2. Once the oven has cooled down for about 1 hour and the Door Locked light has gone out, the oven door may be opened. 3. To avoid possible burns, use care when opening the oven door after the self cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. To stop or interrupt a self clean cycle (once it has been activated): 1. Press OFF. 2. Once the oven has cooled down for about 1 hour and the door locked light has turned off, the oven door can be opened. 3. Restart the self clean cycle once all conditions have been corrected. NOTE Whenever the self clean feature is active, you may check the amount of time remaining in the self clean cycle by pressing the clean key. Remember the range door cannot be opened until the range has cooled sufficiently. You will need to add about 1 hour to the time displayed before you can use the range for cooking. When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.