Frigidaire GCRG3038AD Complete Owners Guide - Page 37

Replacing the Oven Light, Removing the Storage Drawer

Page 37 highlights

Replacing the Oven Light CAUTION Be sure the oven is unplugged and all parts are cool before replacing the oven light. Replacing the oven interior light bulb: The interior oven light is located at the rear of the oven cavity and covered with a glass shield. The glass shield must be in place whenever the oven is in use (Figure 23). 1. Turn electrical power off at the main source or unplug the appliance. 2. Remove the interior oven light shield after removing the wire holder by carefully moving the wire to the side of the glass shield. The tension from the wire holds the glass shield in place. 3. Pull the shield straight out. Do not twist or turn. 4. Replace the bulb with a new appliance bulb. 5. Replace the glass oven light shield. Replace wire holder. 6. Turn the power back on again at the main source (or plug the appliance back in). 7. Be sure to reset the time of day on the clock. 37 Care and Cleaning Removing the Storage Drawer Use the storage drawer for storing cooking utensils. The drawer can be removed to facilitate cleaning under the range. Use care when handling the drawer. Figure 24: Open storage drawer glass shield wire holder Figure 23: Oven light protected by glass shield Figure 25: Closed storage drawer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

37
CARE AND CLEANING
Replacing the Oven Light
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the
oven cavity and covered with a glass shield° The
glass shield must be in place whenever the oven is
in use (Figure 23)°
Turn electrical power off at the main source or
unplug the appliance°
Remove the interior oven light shield after re-
moving the wire holder by carefully moving the
wire to the side of the glass shield° The tension
from the wire holds the glass shield in place°
Pull the shield straight out° Do not twist or turn°
Replace the bulb with a new appliance bulb°
Replace the glass oven light shield° Replace
wire holder°
Turn the power back on again at the main
source (or plug the appliance back in)°
Be sure to reset the time of day on the clock°
wire
holder
glass
shield
Figure 23: Oven light protected by glass shield
Use the storage drawer for storing cooking utensils°
The drawer can be removed to facilitate cleaning
under the range° Use care when handling the drawer°
Removing the Storage Drawer
Figure 24: Open storage drawer
Figure 25: Closed storage drawer
CAUTION
Be sure the oven is unplugged and all parts are
cool before replacing the oven light°