Fujitsu 4340C Operator's Guide - Page 100

Basic Product Specification 1 Scanner Type ADF (Duplex), Document bed 2 Image sensor CCD x 2 Front/Back 3 Light source White Xenon fluorescent tube x 2 Front/Back 4 Document Size Minimum Maximum A8 (Portrait) A4/Letter/Legal 5 Paper Weight 52 g/m2 (14 lb) to 127 g/m2 (34 lb) Note (*1) 6 Scanning Speed Note (*2) Monochrome Color 40 pages/min simplex, 80 sides/min duplex (@200dpi) 34 pages/min simplex, 48 sides/min duplex (@150dpi) Note (*3) 7 ADF Capacity 100 sheets (A4, 64 g/m2 (20 lb)) Note (*3) 8 Optical Resolution 600 dpi 9 Output Res- Binary olution Note (*4) 50 - 800 dpi Standard gradient is 1 dpi, (multiples are possible) Grayscale 50 - 600 dpi Standard gradient is 1 dpi, (multiples are possible) Color 50 - 600 dpi Standard gradient is 1 dpi, (multiples are possible) 10 Grayscale level (internal) 1024 levels (10 bits) 11 Halftone Patterns Dither/Error diffusion 12 Other function JPEG compression Note (*5) 13 Interface Note (*6) SCSI-2 (SE) Shield-type 50 pin (pin-type) halfpitch Third Party Slot Note (*7) NOTES *1: The details are described in Chapter5 "ADF DOCUMENT SPECIFICATION". *2 ) The scanning speeds given are the maximum mechanical scanning speeds. During actual scanning some extra time will be required for data transfer and software processing. *3 ) The maximum number will differ due to the paper thickness. Refer to Chapter5 "ADF DOCUMENT SPECIFICATION". *4 ) Maximum output resolution may vary according to the scan size, and setting (simplex/duplex) *5 ) fi-475CMP3 (JPEG compression board) must be installed. *6 ) Both SCSI-2 and the Third Party Slot can not be used at the same time. *7 ) The Power consumption of the boards should be as follows: - In the Low Power Mode : Less than 0.35 A - Without IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) : Less than 1.5 A - With IPC-4D(IMGGE PROCESSING CIRCUIT BOARD) : Less than 3.0 A G 10-2