Fujitsu 4340C Operator's Guide - Page 77
Select Interface, Display the TPS Board ID Number, At Screen 29, press
UPC - 097564304156
View all Fujitsu 4340C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
12 Select Interface 1. Press "Next" or "Previous" Screen 29 and let the scanner display Screen 29. ! 14 = Au t I nt er f o/ S CS I ac e / T PS NOTICE The Screen 29 will appear oniy when the scanner has proper interface boards or option boards in the third party slot. 2. At Screen 29, press or to select the interface type. Press setting. if you want to change the NOTICE 1.Normally, this setting does not have to be changed. 2.When an appropriate board is installed in the third party slot of the scanner, the scanner automatically turns off the SCSI interface, activating the board in the third party slot. Screen 54 can be used to forcibly change the selected interface. The selected interface is then forcibly changed. 3.The SCSI interface and the board installed in the third party slot cannot be used at the same time. 4.The default is Auto. 3. Press to return. 13 Display the TPS Board ID Number 1. Press "Next" or "Previous" Screen 30 and let the scanner display Screen 30. ! 15 T PS Bo a r d I nt er f a c e I D= 0 The scanner displays the ID number if the applicable board is installed. NOTICE If the Fujitsu video Interface Option board is installed properly, the display shows "ID=7". 2. Press to return. G 7-13