Fujitsu 6130 Getting Started Guide - Page 11

ATTENTION To make sure that FUJITSU TWAIN 32 is successfully installed, perform a scan with a TWAIN-compliant application such as ScandAll PRO. For information about how to scan with ScandAll PRO, refer to section "2.4 Checking Scanner Driver Operation" on page 9. For FUJITSU ISIS Scanner Driver FUJITSU ISIS is an ISIS-compliant scanner driver. To use this scanner with any ISIS-compatible application, install FUJITSU ISIS, following the procedure below. ■ Preparation Do the following before installing the driver: • Unpack the Setup CD-ROM, but do not insert the Setup CD-ROM into the CD drive yet. • Connect the scanner correctly to your computer. HINT For details on how to connect the scanner, refer to section "2.2 Connecting the Scanner to Your PC" on page 4. ■ Installing the FUJITSU ISIS Scanner Driver HINT Screenshots taken in Windows XP are used as examples. The displayed windows and operations may slightly vary depending on the operating system you are using. 1. Press the Power button to turn on the scanner. 2. Turn on your computer, and then log on to Windows. ATTENTION Be sure to log on as a user with "Administrator" privileges. 3. When the scanner is automatically detected, [Found New Hardware Wizard] or [Add/Remove Hardware Wizard] dialog box appears. Click the [Cancel] button to close the Wizard dialog box. 4. Insert the "Setup CD-ROM" into the CD drive. ⇒ appears. ATTENTION This screen may not appear if the "AutoPlay" setting is set to off. In this case, find "Install.exe" in the CD-ROM using "Explore" or "My Computer" and execute it. 5. Click [INSTALL PRODUCTS], and then click [ISIS Driver]. 6. Error Recovery Guide Installation dialog box appears. Error Recovery Guide is an application with which you can view on-screen information for troubleshooting errors that may occur in the scanner. This guide helps solve problems, so select [Yes] to install it. You may also choose to install it later. ATTENTION After you select [Yes] for installing Error Recovery Guide, the [Choose Setup Language] dialog box appears. Select a language and follow the on-screen instructions. The Error Recovery Guide dialog box is automatically displayed when the installation is complete. Wait until the installation of the ISIS driver starts. 7. Select a language for the installation on the [Choose Setup Language] dialog box, and then click the [Next] button. 8. Install the driver, following the on-screen instructions. fi-6130/fi-6230 Image Scanner Getting Started 6