Fujitsu 6130 Getting Started Guide - Page 9

2.2 Connecting the Scanner to Your PC 1. Connect the USB cable to the USB connector. 2. Connect the other end of the USB cable to the PC. ATTENTION • Be sure to use the USB cable which comes as an accessory with this scanner. Scanning operation with commercially available cables is not guaranteed. • When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly. • If you connect the scanner with USB 2.0, it is required that the USB port and Hub are compliant with USB 2.0. The scanning speed may slow down if it is connected with USB1.1. 2.3 Installing the Scanner Software To scan documents with this scanner, you must install a scanner driver for operating the scanner as well as scanning software (hereinafter called the "application") for launching the driver and performing a scan. The scanner drivers and application provided with the scanner are as follows: • Scanner driver: FUJITSU TWAIN 32 (D page 4) FUJITSU ISIS (D page 6) • Scanning application: ScandAll PRO (D page 7) (Supports both FUJITSU TWAIN 32 and ISIS) Install either of the scanner drivers above and ScandAll PRO. ATTENTION Be sure to install a scanner driver, FUJITSU TWAIN 32 or FUJITSU ISIS for using VRS Image Processing Option, also. Installing any one of the scanner drivers will also install "Software Operation Panel," which is needed to change the scanner settings. In addition, this scanner is bundled with the following software applications. To make full use of the scanner, try to use them together. • Error Recovery Guide (D page 7) When errors occur in the scanner, you can view information about what happened to the scanner and how to solve the problem on the screen of the personal computer. • Image Processing Software Option (D page 7) This is an optional application for performing binary image processing on scanned images. • QuickScan Pro™ (D page 7) This application complies with the ISIS standard and it is used for scanning images. This scanner is accompanied with a trial version of this application. • Adobe Acrobat (D page 8) This is an industry-standard application used for creating, managing, and making use of digitalized documents in PDF format. How to install drivers and applications is described below. For FUJITSU TWAIN32 Scanner Driver FUJITSU TWAIN 32 is a TWAIN-compliant scanner driver. To use this scanner with any TWAIN-compatible application, install FUJITSU TWAIN 32, following the procedure below. ■ Preparation Do the following before installing the application: • Unpack the Setup CD-ROM, but do not insert the Setup CD-ROM into the CD drive yet. • Connect the scanner correctly to your computer. HINT For details on how to connect the scanner, refer to section "2.2 Connecting the Scanner to Your PC" on page 4. • Uninstall any older versions of FUJITSU TWAIN 32 if they are already installed on your computer. ATTENTION Uninstall [Scanner Utility for Microsoft Windows] from [Add/ Remove Programs] on the control panel. fi-6130/fi-6230 Image Scanner Getting Started 4