Fujitsu Fi-4750c Operating Guide - Page 56

Basic Product Specification No. Item Specification Remarks 1 Operating method ADF (Duplex), Flatbed 2 Image sensor CCD x 2 Front/Back 3 Light source LED Lamp x 2 Green, Red, Blue 4 Document Size Minimum A8 (Portrait) Maximum A3/Double Letter 5 Document Thickness 52 g/m2 (14 lb) to 127 g/m2 (34 lb) Note *1 6 Optical Resolution 400 dpi 7 Output Resolution Binary 100/150/200/240/300/400/600/800 dpi 100/150/200/240/300/400/600 dpi Grayscale 100/150/200 dpi S im p lex Duplex Color 100/150/200/240/300/400/600 dpi 8 Grayscale level (internal) 1024 levels (10 bits) 9 Scanning Speed (mechanical) Note *2 S im p lex White binary Unicolor binary Color 50ppm, 200dpi, A4, Portrait 35ppm, 300dpi, A4, Portrait 64ppm, 200dpi, A4, Landscape 36ppm, 200dpi, A4, Portrait 16ppm, 200dpi, A4, Portrait Note *3 Duplex White binary Unicolor binary Color 90ipm, 200dpi, A4, Portrait 62ipm, 300dpi, A4, Portrait 114ipm, 200dpi, A4, Landscape 64ipm, 200dpi, A4, Portrait 24ipm, 200dpi, A4, Portrait 10 Halftone patterns Dither/Error diffusion 11 Capacity of ADF 100 sheets (A4, 64 g/m2 (17 lb)) Note *4 12 Compression M H /M R /M M R Note *5 13 Interface Note *6 SCSI-2 High Density (Half) 50-pin, Female Third Party Slot Note *7 Notes *1: The details are described in chapter 4. *2: The actual scanning speed might differ due to host computers' environment. *3: These speeds do not contain processing time at the host computer. *4: The maximum number will differ due to the paper thickness. Refer to chapter 4. *5: The scanning speed might be slow. The usage with NO COMPRESSION is recommended. *6: Both SCSI-2 and the Third Party Slot can not be used at the same time. *7: The Power consumption of the boards should be as follows: - In the Low Power Mode: Less than 0.35 A - With IPC-4D option: Less than 1.5 A - Without IPC-4D option: Less than 3.0 A 5-1