Fujitsu Fi-4750c Operating Guide - Page 72
This offset refers to the difference from the value adjusted by automatic offset adjustment.
UPC - 097564303531
View all Fujitsu Fi-4750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
(Continued) No Item Description Selectable parameters Default 14 Select Interface Selects the interface when the scanner has a board in the third party Slot. Auto/SCSI/Tps Auto 15 Display TPS Board ID Number Displays the ID number of the board which is installed in the third party Slot. --- --- 16 IPC mode When the IPC-4D image processing board is installed in the third party Slot, select this IPC-4D board or the image processing circuit built in the scanner. Standard/IPC4D Standard Adjusts the edge areas to be erased from 17 ADF Edge Erasing the image scanned by the automatic document feeder (ADF). Left/Right: 0 to 15 mm Top: 0 to 15 mm Bottom: -7 to +7 mm Left/Right: 0 mm Top: 0 mm Bottom: 0 mm 18 FB Edge Erasing Adjusts the edge areas to be erased from the image scanned by the flat bed (FB). Left/Right: 0 to 15 mm Top: 0 to 15 mm Bottom: 0 to 15 mm Left/Right: 0 mm Top: 0 mm Bottom: 0 mm 19 Select light source Selects a light source in reading in unicolor. R/G/B/W G Select this mode when reading the image 20 High quality mode in high quality. However, the reading speed On/Off Off reduces to half. * This offset refers to the difference from the value adjusted by automatic offset adjustment. ** Some restrictions apply to the detection of a double feed. 7-3