Fujitsu Fi-4750c Operating Guide - Page 81
Display the TPS Board ID Number, 16. Select Built-In/IPC-4D Image Processing
UPC - 097564303531
View all Fujitsu Fi-4750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
15. Display the TPS Board ID Number 1 Press "Next" or "Previous" scanner display Screen 55. (An Example) and let the The scanner displays the ID number if the applicable board is installed. NOTICE If the Fujitsu video Interface Option board is installed properly, the display shows "ID=7". 2 Press to return. 16. Select Built-In/IPC-4D Image Processing 1 Press "Next" or and let the scanner display the Screen 56. 2 At Screen 56, press or to select "Standard" or "IPC4D". When "Standard" is selected, the scanner uses its built-in image processing. On the other hand, the scanner selects the image processing of the IPC-4D when the "IPC-4D" is installed and selected. NOTICE The factory default is "Standard". NOTICE fi-4750C has built-in Image Processing. The following image processing is supported both by the fi-4750C and the IPC-4D. As a default, the scanner built-in functions are enabled. By setting "On" using the Operator Panel, the IPC-4D image processing overrides the built-in functions. Image Processing 1 Emphasis/Smoothing 2 Outline 3 Simplified Dynamic Threshold IPC-4D 5 x 5 matrix Pre-threshold Laplacian IPC-2 like SDTC fi-4750C 3 x 3 matrix Laplacian 3 x 3 max-min The IPC-4D support of those functions is intended for compatibility with the IPC-3/3D (except for image quality). The matrix size used in the IPC-4D is larger than the one in the fi-4750C. The fi-4750C Built-in Dynamic Threshold is a new algorithm. 7-12