Fujitsu MJA2500BH Maintenance Manual - Page 147
Table 5.24, Format of SCT STATUS Response 1/2, Initialized flag maintained Power-OFF/ON - specs
![]() |
View all Fujitsu MJA2500BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
5.3 Host Commands Table 5.24 Format of SCT STATUS Response (1/2) Byte(hex) Contents 00, 01 02, 03 04, 05 06 to 09 0A 0B to 0D 0E, 0F 10, 11 12, 13 Format Version SCT Version SCT Spec Status Flag Bit31-1: Reserved Bit0: Initialized flag (maintained Power-OFF/ON) 0 = When any user LBA is written, this bit is cleared. This bit is also cleared if the capacity of the drive is changed via SET MAX (EXT), DCO. 1= A WRITE SAME command to all logical blocks has completed without error. Drive State 00h = Active 01h = not support (Standby). 02h = not support (Sleep). 03h = DST executing in background 04h = SMART Off-line Data collection executing in background 05h = SCT command executing in background 06h-FFh = Reserved Reserved Extended Status Code Status of last SCT command issued * (See Table 5.25) Action Code Action code of last SCT command issued Function Code Function code of last SCT command issued C141-E293 5-73
![](/manual_guide/products/fujitsu-mja2500bh-maintenance-manual-3f1243c/147.png)