Fujitsu P50XHA10 User Manual - Page 33
Adjustment - optimal settings
View all Fujitsu P50XHA10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English • FEATURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Allows setting of 24-frame mode. (See P. E-34.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.) Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-35.) Others : Can make other settings. (See P. E-36-E-38.) ADJUSTMENT Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart. Select the item with , and then adjust with . Finally, press to implement the adjustments. Adjustment Item Contents of Adjustments Dot Clock (RGB2) You may find that pictures blur, depending on the clock frequency of your PC's processor. If you experience blurring, you can obtain a clearer picture by adjusting the "Dot Clock". Clock Phase (RGB2) Pictures may blur as the clock phase of your PC may be different. In this case, adjust the clock phase manually. Normally, the automatic setting ensures the optimal value. Clamp Position (RGB2, Comp. video) Adjusts the clamp position in accordance with the input signal received from connected equipment. Normally, the automatic setting ensures the optimal value. Auto Calibration Adjusts the dynamic range of images to the (RGB2) optimum. Performed while a white screen signal is received. Operation Use to select the optimal value at which blurring of pictures is eliminated. Adjustment Range/Remarks -60 to +60 Use to select the optimal value at which blurring of pictures is eliminated. Auto/Manual Manual: 1 to 32 Use to select the optimal value. -8 to +8 Display the Auto Calibration screen and select Execute, and then use to select the item. Execute/Cancel * On-screen information disappears if you do not take any action for about 60 seconds. E-33