Ganz Security ZN1A-B4DMZ56U-1 GXi Series VCA Interface Manual - Page 100
PTZ Configuration and Auto-Tracking, PTZ General Configuration
View all Ganz Security ZN1A-B4DMZ56U-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Ganz GXi Series VCA Interface Manual V3.05.31.18 PTZ Configuration and Auto-Tracking PTZ General Configuration PTZ General Configuration allows configuration of general VCA PTZ support. This extends the VCA functions to work with PTZ cameras. The general PTZ configuration for VCA is controlled by the settings highlighted in the red box in the figure below. Camera Preset Number for VCA Home Position This text box specifies the PTZ camera preset number for VCA home position. Since the VCA configuration is scene dependent (e.g. zone configuration is only valid when the PTZ is pointing at the same position), the VCA can be configured such that all VCA functionality is related to a single PTZ preset. This is the so-called "camera preset for VCA home position". Enable VCA Only at Home Position When checked, VCA will be only enabled when camera is at the VCA home preset position. If the PTZ is moved by the user or any other function, the VCA is inhibited until the camera is returned to the VCA home preset position. Note that the camera can be configured to return to the home preset position automatically (see below). Return to Home Position Following Manual Override When checked, the PTZ camera will automatically return to the VCA home position following user control of the camera (manual override) after the specified timeout has elapsed. 05-2018-A 99 | P a g e