Ganz Security ZN1A-B4DMZ56U-1 GXi Series VCA Interface Manual - Page 14
Switching VCA On and Off, Enable VCA, Object Tracking, Counting Line, Tracking Mode
View all Ganz Security ZN1A-B4DMZ56U-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Ganz GXi Series VCA Interface Manual V3.05.31.18 Switching VCA On and Off By default, VCA is disabled. To enable VCA it must be activated. Select the VCA menu and then the Enable/Disable sub menu. Tick the Enable check box under Analytics and select the required mode. Enable VCA Check/Uncheck to enable/disable the VCA functionality at a global level. If unchecked, ALL VCA functionality will be disabled. Object Tracking Check/Uncheck to enable/disable the object tracking engine. Counting Line Check/Uncheck to enable/disable the counting line functionality. The counting line functionality requires a VCAadvanced, VCAcount or VCAaccess license. Tracking Mode The default tracking mode is Surveillance. This is optimized for intruder detection / outdoor scenes. If you have a VCApro license, you may also select People tracking, which is optimized to deal with tracking multiple people in indoor scenes. NOTE: Only enable the features which are necessary for the deployment scenario. Since each feature consumes a portion of system resources, enabling features which are not required may degrade the overall system performance. 05-2018-A 13 | P a g e