Garmin Edge 810 Owner's Manual - Page 16

System Settings - battery life

Get Garmin Edge 810 PDF manuals and user guides View all Garmin Edge 810 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

3 Select Auto Lap > Auto Lap Trigger > By Position > Lap At. 4 Select an option: • Select Lap Press Only to trigger the lap counter each time you select and each time you pass any of those locations again. • Select Start and Lap to trigger the lap counter at the GPS location where you select and at any location during the ride where you select . • Select Mark and Lap to trigger the lap counter at a specific GPS location marked before the ride and at any location during the ride where you select . 5 If necessary, customize the lap data fields (page 11). Marking Laps by Distance You can use Auto Lap to automatically mark the lap at a specific distance. This feature is helpful for comparing your performance over different parts of a ride (for example, every 10 miles or 40 kilometers). 1 From the home screen, select > Activity Profiles. 2 Select a profile. 3 Select Auto Lap > Auto Lap Trigger > By Distance > Lap At. 4 Enter a value. 5 If necessary, customize the lap data fields (page 11). Using Auto Scroll You can use the auto scroll feature to automatically cycle through all of the training data pages while the timer is running. 1 From the home screen, select > Activity Profiles. 2 Select a profile. 3 Select Auto Scroll > Auto Scroll Speed. 4 Select a display speed. Changing the Start Notice This feature automatically detects when your device has acquired satellites and is moving. It is a reminder to start the timer so you can record your ride data. 1 From the home screen, select > Activity Profiles. 2 Select a profile. 3 Select Start Notice > Start Notice Mode. 4 Select an option: • Select Once. • Select Repeat > Repeat Delay to change the amount of time to delay the reminder. System Settings Select > System. • GPS Settings (page 12) • Display Settings (page 12) • Data Recording Settings (page 12) • Unit Settings (page 12) • Configuration Settings (page 12) • Language Settings (page 12) • Tone Settings (page 12) GPS Settings Training Indoors You can turn GPS off when you are training indoors or to save battery life. From the home screen, select > System > GPS > GPS Mode > Off. When GPS is off, speed and distance are not available unless you have an optional sensor that sends speed and distance data to the device (such as the GSC 10). The next time you turn on the device, it will search for satellite signals again. Setting Your Elevation If you have accurate elevation data for your present location, you can manually calibrate the altimeter on your device. 1 From the home screen, select > System > GPS > Set Elevation. 2 Enter the elevation, and select . Viewing Satellites The satellite page shows your current GPS satellite information. For more information about GPS, go to www.garmin.com / aboutGPS. From the home screen, select > System > GPS > View Satellites. GPS accuracy appears at the bottom of the page. The green bars represent the strength of each satellite signal received (the number of the satellite appears below each bar). Display Settings Select > System > Display. Backlight Timeout: Adjusts the length of time before the backlight turns off (page 2). Color Mode: Sets the device to display day or night colors. You can select Auto to allow the device to automatically set day or night colors based on the time of day. Screen Capture: Allows you to save the image on the device screen. Calibrate Screen: Aligns the screen to properly respond to touches (page 14). Data Recording Settings Select > System > Data Recording. Record To: Sets the data storage location (page 8). Recording Interval: Controls how the device records activity data. Smart records key points where you change direction, speed, or heart rate. 1 Sec. records points every second. It creates a very detailed record of your activity and increases the size of the activity. Data Averaging: Controls whether the device includes zero values for cadence and power data that occur when you are not pedaling (page 6). Changing the Units of Measure You can customize units of measure for distance and speed, elevation, temperature, weight, position format, and time format. 1 Select > System > Units. 2 Select a measurement type. 3 Select a unit of measure for the setting. Changing the Configuration Settings You can modify all of the settings you configured in the initial setup. 1 Select > System > Device Reset > Initial Setup. 2 Follow the on-screen instructions. Changing the Device Language From the home screen, select > System > Language. Setting the Device Tones From the home screen, select > System > Tones. Time Zones Each time you turn on the device and acquire satellites, the device automatically detects your time zone and the current time of day. 12 Customizing Your Device

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
3
Select
Auto Lap
>
Auto Lap Trigger
>
By Position
>
Lap
At
.
4
Select an option:
•
Select
Lap Press Only
to trigger the lap counter each
time you select
and each time you pass any of those
locations again.
•
Select
Start and Lap
to trigger the lap counter at the GPS
location where you select
and at any location during
the ride where you select
.
•
Select
Mark and Lap
to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select
.
5
If necessary, customize the lap data fields (
page 11
).
Marking Laps by Distance
You can use Auto Lap to automatically mark the lap at a specific
distance. This feature is helpful for comparing your performance
over different parts of a ride (for example, every 10 miles or 40
kilometers).
1
From the home screen, select
>
Activity Profiles
.
2
Select a profile.
3
Select
Auto Lap
>
Auto Lap Trigger
>
By Distance
>
Lap
At
.
4
Enter a value.
5
If necessary, customize the lap data fields (
page 11
).
Using Auto Scroll
You can use the auto scroll feature to automatically cycle
through all of the training data pages while the timer is running.
1
From the home screen, select
>
Activity Profiles
.
2
Select a profile.
3
Select
Auto Scroll
>
Auto Scroll Speed
.
4
Select a display speed.
Changing the Start Notice
This feature automatically detects when your device has
acquired satellites and is moving. It is a reminder to start the
timer so you can record your ride data.
1
From the home screen, select
>
Activity Profiles
.
2
Select a profile.
3
Select
Start Notice
>
Start Notice Mode
.
4
Select an option:
•
Select
Once
.
•
Select
Repeat
>
Repeat Delay
to change the amount of
time to delay the reminder.
System Settings
Select
>
System
.
•
GPS Settings (
page 12
)
•
Display Settings (
page 12
)
•
Data Recording Settings (
page 12
)
•
Unit Settings (
page 12
)
•
Configuration Settings (
page 12
)
•
Language Settings (
page 12
)
•
Tone Settings (
page 12
)
GPS Settings
Training Indoors
You can turn GPS off when you are training indoors or to save
battery life.
From the home screen, select
>
System
>
GPS
>
GPS
Mode
>
Off
.
When GPS is off, speed and distance are not available unless
you have an optional sensor that sends speed and distance
data to the device (such as the GSC 10). The next time you turn
on the device, it will search for satellite signals again.
Setting Your Elevation
If you have accurate elevation data for your present location,
you can manually calibrate the altimeter on your device.
1
From the home screen, select
>
System
>
GPS
>
Set
Elevation
.
2
Enter the elevation, and select
.
Viewing Satellites
The satellite page shows your current GPS satellite information.
For more information about GPS, go to
www.garmin.com
/aboutGPS
.
From the home screen, select
>
System
>
GPS
>
View
Satellites
.
GPS accuracy appears at the bottom of the page. The green
bars represent the strength of each satellite signal received (the
number of the satellite appears below each bar).
Display Settings
Select
>
System
>
Display
.
Backlight Timeout
: Adjusts the length of time before the
backlight turns off (
page 2
).
Color Mode
: Sets the device to display day or night colors. You
can select
Auto
to allow the device to automatically set day
or night colors based on the time of day.
Screen Capture
: Allows you to save the image on the device
screen.
Calibrate Screen
: Aligns the screen to properly respond to
touches (
page 14
).
Data Recording Settings
Select
>
System
>
Data Recording
.
Record To
: Sets the data storage location (
page 8
).
Recording Interval
: Controls how the device records activity
data.
Smart
records key points where you change direction,
speed, or heart rate.
1 Sec.
records points every second. It
creates a very detailed record of your activity and increases
the size of the activity.
Data Averaging
: Controls whether the device includes zero
values for cadence and power data that occur when you are
not pedaling (
page 6
).
Changing the Units of Measure
You can customize units of measure for distance and speed,
elevation, temperature, weight, position format, and time format.
1
Select
>
System
>
Units
.
2
Select a measurement type.
3
Select a unit of measure for the setting.
Changing the Configuration Settings
You can modify all of the settings you configured in the initial
setup.
1
Select
>
System
>
Device Reset
>
Initial Setup
.
2
Follow the on-screen instructions.
Changing the Device Language
From the home screen, select
>
System
>
Language
.
Setting the Device Tones
From the home screen, select
>
System
>
Tones
.
Time Zones
Each time you turn on the device and acquire satellites, the
device automatically detects your time zone and the current
time of day.
12
Customizing Your Device